SailBoatStuff Home Page Imtra LED Utility Lights    Home Page
ANCHORING
CABIN
COVERS
DECK
LED LIGHTING
LIGHTING
XENON LIGHTING
LIGHT BULBS
MOOR & DOCK
REFRIGERATION
OTHER
COMPANIES
GLOSSARY
A - C    D - G
H - L    M - Q
R - T    U - Z
Boats & Sails
CONTACT & FAQ
Shipping Info
Copyright

Imtra Marine Products

Imtra LED Utility Lights and Mounting Bezels on this webpage (FREE SHIPPING OVER $100*):
IS15-12VDC Low-Profile LED Utility Lights
IS30-24VDC Low-Profile LED Utility Lights
IS60-12/24VDC Low-Profile LED Utility Lights
IS120-12/24VDC Low-Profile LED Utility Lights
IS15 Mounting Bezel for Surface Mount
IS30 Mounting Bezel for Surface Mount
IS60 Mounting Bezel for Surface Mount
IS120 Mounting Bezel for Surface Mount

Imtra IS15-12VDC Low Profile LED Utility Light

Click for larger image

Imtra Marine Lighting
IS15-12VDC WATERPROOF LED UTILITY LIGHTS BY IMTRA The IS15-12VDC Low-Profile LED Utility Lights by Imtra are a cohesive family of ultra-flat surface-mounted LED fixtures designed to replace traditional types of waterproof, drip-proof, and explosion proof engine & utility lighting (i.e. small cage lights up through 4’ fluorescent shop lights). The composite housings are UV resistant, impact resistant, and completely waterproof. When turned off, their transparent housings virtually disappear overhead.
For ultra-flush installations where rear cabling is permissible, simply make the wire connections and secure to the ceiling with self-tapping screws. For surface-mount cabling, there is a stand-off bezel sized specifically for each model and this allows running cable in and out from any side of the fixture. Please read regarding Maryland, Massachusetts and Washington shipments sales tax. Made in USA.

Features:
  • Ultra-Thin Profile for Near Flush Installations
  • Solid State (Vibration-Proof) Design
  • UV-Stable PMMA (Acrylic) Housing
  • Waterproof (Submersible)
  • Ignition-Protected (Safe with Gas Engines)
  • Stand-Off Bezel Option for Surface-Cabling
  • IS Series Waterproof LED Utility Lights Product Sheet
  • IS15-12VDC Waterproof LED Utility Lights Dimensional Drawing
  • See below for IS15 Mounting Bezel

  • US$127.95 / EACH
  • Housing Finish/Material: Opaque
  • Lens Material: Semi-Transparent/PMMA (Acrylic)
  • Dimensions (L x W x H): 8.00" x 3.125" x 0.236" (203mm x 79mm x 6mm)
  • Input Voltage: 10-14VDC
  • Power Consumption: 9W
  • Output Color: Cool White
  • Light Source: 120 Degrees
  • Correlated Color Temperature (CCT): 6000K
  • Color Rendering Index (CRI): 80
  • Luminous Flux: 850 lm
  • Lifetime Hours: 50,000 hrs
  • Class: Class III
  • Driver: Integrated Current Regulated
  • Install Location: Surface (Flush)
  • Electrical Protections: Transients, Reverse Polarity, Thermal
  • Mounting Method: Surface-Mount #8 Self-Tapping (Not Supplied)
  • Integrated Switch: No
  • Certifications & Compliance: CE, ROHS
  • Warranty: Two (2) Years
  • Weight: 1.0 lbs.
  • Part Number: ILIS15-12V
  • Imtra IS30-24VDC Low Profile LED Utility Light

    Click for larger image

    Imtra Marine Lighting
    IS30-24VDC WATERPROOF LED UTILITY LIGHTS BY IMTRA The IS30-24VDC Low-Profile LED Utility Lights by Imtra are a cohesive family of ultra-flat surface-mounted LED fixtures designed to replace traditional types of waterproof, drip-proof, and explosion proof engine & utility lighting (i.e. small cage lights up through 4’ fluorescent shop lights). The composite housings are UV resistant, impact resistant, and completely waterproof. When turned off, their transparent housings virtually disappear overhead.
    For ultra-flush installations where rear cabling is permissible, simply make the wire connections and secure to the ceiling with self-tapping screws. For surface-mount cabling, there is a stand-off bezel sized specifically for each model and this allows running cable in and out from any side of the fixture. Please read regarding Maryland, Massachusetts and Washington shipments sales tax. Made in USA.

    Features:
  • Ultra-Thin Profile for Near Flush Installations
  • Solid State (Vibration-Proof) Design
  • UV-Stable PMMA (Acrylic) Housing
  • Waterproof (Submersible)
  • Ignition-Protected (Safe with Gas Engines)
  • Stand-Off Bezel Option for Surface-Cabling
  • IS Series Waterproof LED Utility Lights Product Sheet
  • IS30-24VDC Waterproof LED Utility Lights Dimensional Drawing
  • See below for IS30 Mounting Bezel

  • US$244.95 / EACH
  • Housing Finish/Material: Opaque
  • Lens Material: Semi-Transparent/PMMA (Acrylic)
  • Dimensions (L x W x H): 14.00" x 3.125" x 0.236" (356mm x 79mm x 6mm)
  • Input Voltage: 20-27VDC
  • Power Consumption: 16.5W
  • Output Color: Cool White
  • Light Source: 120 Degrees
  • Correlated Color Temperature (CCT): 6000K
  • Color Rendering Index (CRI): 80
  • Luminous Flux: 1700 lm
  • Lifetime Hours: 50,000 hrs
  • Class: Class III
  • Driver: Integrated Current Regulated
  • Install Location: Surface (Flush)
  • Electrical Protections: Transients, Reverse Polarity, Thermal
  • Mounting Method: Surface-Mount #8 Self-Tapping (Not Supplied)
  • Integrated Switch: No
  • Certifications & Compliance: CE, ROHS
  • Warranty: Two (2) Years
  • Weight: 1.0 lbs.
  • Part Number: ILIS30-24V
  • Imtra ILIS60-12/24VDC Low Profile LED Utility Light

    Click for larger image

    Imtra Marine Lighting
    ILIS60-12/24VDC WATERPROOF LED UTILITY LIGHTS BY IMTRA The ILIS60-12/24VDC Low-Profile LED Utility Lights by Imtra are a cohesive family of ultra-flat surface-mounted LED fixtures designed to replace traditional types of waterproof, drip-proof, and explosion proof engine & utility lighting (i.e. small cage lights up through 4’ fluorescent shop lights). The composite housings are UV resistant, impact resistant, and completely waterproof. When turned off, their transparent housings virtually disappear overhead.
    For ultra-flush installations where rear cabling is permissible, simply make the wire connections and secure to the ceiling with self-tapping screws. For surface-mount cabling, there is a stand-off bezel sized specifically for each model and this allows running cable in and out from any side of the fixture. Please read regarding Maryland, Massachusetts and Washington shipments sales tax. Made in USA.

    Features:
  • Ultra-Thin Profile for Near Flush Installations
  • Solid State (Vibration-Proof) Design
  • UV-Stable PMMA (Acrylic) Housing
  • Waterproof (Submersible)
  • Ignition-Protected (Safe with Gas Engines)
  • Stand-Off Bezel Option for Surface-Cabling
  • IS Series Waterproof LED Utility Lights Product Sheet
  • ILIS60-12/24VDC Waterproof LED Utility Lights Dimensional Drawing
  • See below for IS60 Mounting Bezel

  • US$539.95 / EACH
  • Housing Finish/Material: White Powder Coat Anodized 6063 Aluminum Housing
  • Lens Material: Impact and UV Resistant, Semi-Transparent/PMMA (Acrylic)
  • Dimensions (L x W x H): 23.750" x 7.188" x 0.550" (603mm x 181mm x 14mm)
  • Input Voltage: 10-30VDC
  • Power Consumption: 32W
  • Output Color: Cool White
  • Light Source: 120 Degrees
  • Correlated Color Temperature (CCT): 6000K
  • Color Rendering Index (CRI): 80
  • Luminous Flux: 3,400 lm
  • Lifetime Hours: 50,000 hrs
  • Class: Class III
  • Driver: Integrated Current Regulated
  • Install Location: Surface (Flush)
  • Electrical Protections: Transients, Reverse Polarity, Thermal
  • Mounting Method: Surface-Mount #8 Self-Tapping (Not Supplied)
  • Integrated Switch: No
  • Certifications & Compliance: CE, ROHS
  • Warranty: Two (2) Years
  • Weight: 4.0 lbs.
  • Part Number: ILIS60-12/24V
  • Imtra ILIS120-12/24VDC Low Profile LED Utility Light

    Click for larger image

    Imtra Marine Lighting
    ILIS120-12/24VDC WATERPROOF LED UTILITY LIGHTS BY IMTRA The ILIS120-12/24VDC Low-Profile LED Utility Lights by Imtra are a cohesive family of ultra-flat surface-mounted LED fixtures designed to replace traditional types of waterproof, drip-proof, and explosion proof engine & utility lighting (i.e. small cage lights up through 4’ fluorescent shop lights). The composite housings are UV resistant, impact resistant, and completely waterproof. When turned off, their transparent housings virtually disappear overhead.
    For ultra-flush installations where rear cabling is permissible, simply make the wire connections and secure to the ceiling with self-tapping screws. For surface-mount cabling, there is a stand-off bezel sized specifically for each model and this allows running cable in and out from any side of the fixture. Please read regarding Maryland, Massachusetts and Washington shipments sales tax. Made in USA.

    Features:
  • Ultra-Thin Profile for Near Flush Installations
  • Solid State (Vibration-Proof) Design
  • UV-Stable PMMA (Acrylic) Housing
  • Waterproof (Submersible)
  • Ignition-Protected (Safe with Gas Engines)
  • Stand-Off Bezel Option for Surface-Cabling
  • IS Series Waterproof LED Utility Lights Product Sheet
  • ILIS120-12/24VDC Waterproof LED Utility Lights Dimensional Drawing
  • See below for IS120 Mounting Bezel

  • US$1,049.95 / EACH
  • Housing Finish/Material: White Powder Coat Anodized 6063 Aluminum Housing
  • Lens Material: Impact and UV Resistant, Semi-Transparent/PMMA (Acrylic)
  • Dimensions (L x W x H): 44.125" x 7.188" x 0.550" (112cm x 181mm x 14mm)
  • Input Voltage: 10-30VDC
  • Power Consumption: 64W
  • Output Color: Cool White
  • Light Source: 120 Degrees
  • Correlated Color Temperature (CCT): 6000K
  • Color Rendering Index (CRI): 80
  • Luminous Flux: 6,900 lm
  • Lifetime Hours: 50,000 hrs
  • Class: Class III
  • Driver: Integrated Current Regulated
  • Install Location: Surface (Flush)
  • Electrical Protections: Transients, Reverse Polarity, Thermal
  • Mounting Method: Surface-Mount #8 Self-Tapping (Not Supplied)
  • Integrated Switch: No
  • Certifications & Compliance: CE, ROHS
  • Warranty: Two (2) Years
  • Weight: 7.0 lbs.
  • Part Number: ILIS120-12/24V
  • Imtra IS15 Mounting Bezel for Surface Mount

    Click for larger image

    Imtra Marine Lighting
    IS15 MOUNTING BEZEL FOR SURFACE MOUNT BY IMTRA A thin surface-mount bezel machined precisely to fit the IS15 LED Utility Light fixture by Imtra. Use this bezel when only surface-mount cabling is possible. Bezel features several cable exit location choices. Please read regarding Maryland, Massachusetts and Washington shipments sales tax. Made in USA.

    Features:
  • UV Stable Acrylic
  • Low Profile Design
  • Form Fit and Machined for IS30 LED Utility Light Fixture

  • US$28.95 / EACH
  • Housing Finish/Material: Opaque/PMMA (Acrylic)
  • Dimensions (L x W x H): 8.00" x 3.13" x 0.28" (203mm x 80mm x 7mm)
  • Base Dimensions (L x W): 8.00" x 3.13" (203mm x 80mm)
  • Mounting Method: Screws
  • Weight: 1.0 lbs.
  • Part Number: ILIS15-BZL
  • Imtra IS30 Mounting Bezel for Surface Mount

    Click for larger image

    Imtra Marine Lighting
    IS30 MOUNTING BEZEL FOR SURFACE MOUNT BY IMTRA A thin surface-mount bezel machined precisely to fit the IS30 LED Utility Light fixture by Imtra. Use this bezel when only surface-mount cabling is possible. Bezel features several cable exit location choices. Please read regarding Maryland, Massachusetts and Washington shipments sales tax. Made in USA.

    Features:
  • UV Stable Acrylic
  • Low Profile Design
  • Form Fit and Machined for IS30 LED Utility Light Fixture

  • US$38.95 / EACH
  • Housing Finish/Material: Opaque/PMMA (Acrylic)
  • Dimensions (L x W x H): 14.0" x 3.13" x 0.28" (356mm x 80mm x 7mm)
  • Base Dimensions (L x W): 14.0" x 3.13" (356mm x 80mm)
  • Mounting Method: Screws
  • Weight: 1.0 lbs.
  • Part Number: ILIS30-BZL
  • Imtra IS60 Mounting Bezel for Surface Mount

    Click for larger image

    Imtra Marine Lighting
    IS60 MOUNTING BEZEL FOR SURFACE MOUNT BY IMTRA A thin surface-mount bezel machined precisely to fit the IS60 LED Utility Light fixture by Imtra. Use this bezel when only surface-mount cabling is possible. Bezel is supplied in two halves and allows cabling from either end of fixture. Please read regarding Maryland, Massachusetts and Washington shipments sales tax. Made in USA.

    Features:
  • UV Stable Acrylic
  • Low Profile Design
  • Form Fit and Machined for IS60 LED Utility Light Fixture

  • US$79.95 / EACH
  • Housing Finish/Material: Opaque/PMMA (Acrylic)
  • Dimensions (L x W x H): 23.75" x 7.19" x 0.55" (603mm x 183mm x 14mm)
  • Base Dimensions (L x W): 23.75" x 7.19" (603mm x 183mm)
  • Mounting Method: Screws
  • Weight: 1.0 lbs.
  • Part Number: ILIS60-BZL
  • Imtra IS120 Mounting Bezel for Surface Mount

    Click for larger image

    Imtra Marine Lighting
    IS120 MOUNTING BEZEL FOR SURFACE MOUNT BY IMTRA A thin surface-mount bezel machined precisely to fit the IS120 LED Utility Light fixture by Imtra. Use this bezel when only surface-mount cabling is possible. Bezel is supplied in two halves and allows cabling from either end of fixture. Please read regarding Maryland, Massachusetts and Washington shipments sales tax. Made in USA.

    Features:
  • UV Stable Acrylic
  • Low Profile Design
  • Form Fit and Machined for IS120 Utility Light Fixture

  • US$129.95 / EACH
  • Housing Finish/Material: Opaque/PMMA (Acrylic)
  • Dimensions (L x W x H): 44.13" x 7.19" x 0.55" (1121mm x 183mm x 14mm)
  • Base Dimensions (L x W): 44.13" x 7.19" (1121mm x 183mm)
  • Mounting Method: Screws
  • Weight: 2.0 lbs.
  • Part Number: ILIS120-BZL

  •