SailBoatStuff Home Page Imtra LED Courtesy Lights    Home Page
ANCHORING
CABIN
COLD CATHODE
COVERS
DECK
LED LIGHTING
LIGHTING
XENON LIGHTING
LIGHT BULBS
MOOR & DOCK
REFRIGERATION
OTHER
COMPANIES
GLOSSARY
A - C    D - G
H - L    M - Q
R - T    U - Z
Boats & Sails
CONTACT & FAQ
Shipping Info
Copyright


FREE SHIPPING OVER $100* We are having technical issues with our shopping cart 'Check Out'. To order, please call us at 1-818-989-2233 so we can take your order over the phone or email Questions? We accept Discover, Mastercard, Visa and American Express Shopping Cart Secured by Verisign

Imtra Marine Products

Imtra Marine LED Courtesy Lights on this webpage (FREE SHIPPING OVER $100*):
Valencia LED Courtesy Lights
Majorca LED Courtesy Lights
Andromeda G LED Courtesy Lights
Andromeda G1 LED Courtesy Lights
Duxbury LED Courtesy Lights
Yukon LED Courtesy Lights
For more information regarding LED Lighting

Valencia LED Courtesy Lights by Imtra Marine Lighting

Click for larger image

Imtra Marine Lighting

Majorca LED Courtesy Light Diagram by Imtra Marine Lighting

VALENCIA LED COURTESY LIGHTS BY IMTRA The Valencia is Imtra's largest LED Courtesy Light and was designed with larger yachts and megayachts in mind. It features fully sealed electronics and an AISI 316 stainless cover plate. Despite its flat profile, it is completely surface-mounted for ease of installation. Its low profile and indirect illumination make it ideal for stairs and walkway lighting. For a slight variation on this design, please consider our Majorca model (see below). Please read regarding Maryland, Massachusetts and Washington shipments sales tax.

    Features & Benefits: AISI 316 Stainless Steel Bezel · Sealed and Potted Electronics · Convenient Surface-Mount Installation · Indirect Non-Glare Illumination · Miniscule Power Consumption · Integrated Constant-Current Driver · Up to 50,000 Hours Life
US$139.95 / EACH
  • Trim Ring Finish: High Polish Stainless Steel
  • Trim Ring Material: AISI 316 Stainless Steel
  • Lens Material: Frosted Glass
  • Dimensions: 3.14" Diameter x 0.67" (80mm x 17mm)
  • Voltage: 10-30VDC
  • Power Consumption: 1.0W
  • Luminous Flux: 29 Lumens Warm, 33 Lumens Cool
  • LED: 2 x Warm White, Cool White or Blue SMD LEDs (Sealed Assembly)
  • Lifetime Hours (L70): 50,000 Hours (70% Output)
  • Wire Size: See Chart
  • Ingress Protection: IP65
  • Protections: Reverse Polarity, Transient, EMI Suppression, ESD
  • Mounting Method: Screw-Mount
  • Weight: 0.5 lbs.
  • Part Number: ILIM70701 / ILIM70702 / ILIM70711 / ILIM70712 / ILIM70731 / ILIM70732
  • Majorca LED Courtesy Lights by Imtra Marine Lighting

    Click for larger image

    Imtra Marine Lighting

    Majorca LED Courtesy Light Diagram by Imtra Marine Lighting

    MAJORCA LED COURTESY LIGHTS BY IMTRA The Majorca LED Courtesy Light features fully sealed electronics and a 316AISI stainless cover plate. Despite its flat profile, it is completely surface-mounted for ease of installation. Its style and size are an excellent match for today's larger yachts and megayachts. Its low profile and indirect illumination makes it ideal for stairs and walkway lighting. For a slight variation on this design, please consider the Valencia model (see above). Please read regarding Maryland, Massachusetts and Washington shipments sales tax.

      Features & Benefits: AISI 316 Stainless Steel Bezel · Sealed and Potted Electronics · Convenient Surface-Mount Installation · Indirect Non-Glare Illumination · Miniscule Power Consumption · Integrated Constant-Current Driver · Up to 50,000 Hours Life
    US$139.95 / EACH
  • Trim Ring Finish: High Polish Stainless Steel
  • Trim Ring Material: AISI 316 Stainless Steel
  • Lens Material: Frosted Glass
  • Dimensions: 3.14" Diameter x 0.67" (80mm x 17mm)
  • Voltage: 10-30VDC
  • Power Consumption: 1.0W
  • Luminous Flux: 29 Lumens Warm, 33 Lumens Cool
  • LED: 2 x Warm White, Cool White or Blue SMD LEDs (Sealed Assembly)
  • Lifetime Hours (L70): 50,000 Hours (70% Output)
  • Wire Size: See Chart
  • Ingress Protection: IP65
  • Protections: Reverse Polarity, Transient, EMI Suppression, ESD
  • Mounting Method: Screw-Mount
  • Weight: 0.5 lbs.
  • Part Number: ILIM70801 / ILIM70811 / ILIM70831
  • Andromeda G Forward-Facing LED Courtesy Lights by Imtra Marine Lighting

    Click for larger image

    Imtra Marine Lighting

    Andromeda G Forward-Facing LED Courtesy Light Diagram by Imtra Marine Lighting

    ANDROMEDA G FORWARD-FACING LED COURTESY LIGHTS BY IMTRA The Andromeda G Courtesy Light has six (6) forward-facing LEDs for distinctive light points that can be seen from a distance for an eye-catching modern look. Its sleek body with optimal low-level LED output makes this courtesy light a popular selection for step and companionway installations. Available in cool white, blue, or red LED and fully waterproof from the harshest elements. Made in Italy. Please read regarding Maryland, Massachusetts and Washington shipments sales tax.

      Features & Benefits: Solid-State Circuitry (Shock/Vibration Proof) · Extreme Low Profile Design · Simple Surface-Mount Installation · Low Power Consumption · Multi-Voltage · Several LED Colors to Choose From · Fully Potted LED SMD Board · 50,000+ Hours Life Expectancy
    US$69.95 / EACH
  • Finish: Chrome (Electroplated Brass)
  • LED: 6 x Cool White, Blue or Red LEDs (Sealed SMD LED Assembly)
  • Dimensions: 3.94" x 0.63" x 0.43" (100 x 16 x 11mm)
  • Voltage: 10-30VDC
  • Power Consumption: 0.95W
  • IP Rating: IP67
  • Wire Size: See Chart
  • Mounting Method: Screw-mount
  • Weight: 0.250 lbs.
  • Part Number: ILFS5725.CT / ILFS5725.CB / ILFS5725.CR
  • Andromeda G1 Bottom-Facing LED Courtesy Lights by Imtra Marine Lighting

    Click for larger image

    Imtra Marine Lighting

    Andromeda G1 Bottom-Facing LED Courtesy Light Diagram by Imtra Marine Lighting

    ANDROMEDA G1 BOTTOM-FACING LED COURTESY LIGHTS BY IMTRA The Andromeda G1 Courtesy Light offers bottom-facing LEDs that give off indirect lighting for a more subtle light effect, avoiding potential distraction in stair risers, companionways, and other general low-level courtesy lighting. Both models (Andromeda G & G1) mount on a surface and do not require any cut-out. They draw minimal power, run cool, and are maintenance free offering longevity to you. Made in Italy. Please read regarding Maryland, Massachusetts and Washington shipments sales tax.

      Features & Benefits: Solid-State Circuitry (Shock/Vibration Proof) · Extreme Low Profile Design · Simple Surface-Mount Installation · Low Power Consumption · Multi-Voltage · Several LED Colors to Choose From · Fully Potted LED SMD Board · 50,000+ Hours Life Expectancy
    US$69.95 / EACH
  • Finish: Chrome (Electroplated Brass)
  • LED: 6 x Cool White, Warm White, Blue or Red LEDs (Sealed SMD LED Assembly)
  • Dimensions: 3.94" x 0.63" x 0.43" (100 x 16 x 11mm)
  • Voltage: 10-30VDC
  • Power Consumption: 0.95W
  • IP Rating: IP67
  • Wire Size: See Chart
  • Mounting Method: Screw-mount
  • Weight: 0.250 lbs.
  • Part Number: ILFS5726.CT / ILFS5726.WW / ILFS5726.CB / ILFS5726.CR
  • Duxbury LED Courtesy Lights by Imtra Marine Lighting

    Click for larger image

    Imtra Marine Lighting

    Duxbury LED Courtesy Light Diagram by Imtra Marine Lighting

    DUXBURY LED COURTESY LIGHTS BY IMTRA The Duxbury LED Courtesy Light is the ideal courtesy and step light for indirect lighting applications. It contains four "hidden" low power SMD LEDs that project their subtle non-glare illumination in a downward direction to effectively illuminate steps and walkways. The flat profile and slightly rounded edges make them ideal for stair risers. The all stainless steel cover is securely installed with screws over the fully sealed and potted LED sub-assembly, resulting in secure mounting and a 100% waterproof installation. They draw minimal power, run cool, and are completely maintenance free. Please read regarding Maryland, Massachusetts and Washington shipments sales tax.

      Features & Benefits:AISI 316 Stainless Steel Bezel · Completely Sealed & Potted LED Sub-Assembly · Miniscule Power Consumption · Simplified Surface-Mount Installation · Integrated Constant-Current Driver · Up to 50,000 Hours Life · Template · Owner's Manual
    US$54.95 / EACH
  • Housing Material: AISI 316 Stainless Steel
  • Finish: Stainless Steel or White Powder Coat
  • Dimensions (L x W x H): 3.50" x 0.75" x 0.30" (89 x 19 x 7.6mm)
  • LED: 4 x Warm White, Cool White or Blue SMD LEDs (Sealed Assembly)
  • Voltage Input: 10-30VDC
  • Power Consumption: 0.48W @ 12V / 0.96W @ 24V
  • Luminous Flux: 9 Lumens
  • Electric Protections: 200V Spike Protection, Reverse Polarity, Transient Protection
  • IP Rating: IP65
  • Wire Size: See Chart
  • Lifetime Hours (L70): 50,000 Hours (70% Output)
  • Mounting Method: Screw-Mount
  • Weight: 0.12 lbs.
  • Part Number: ILIM70501 / ILIM70511 / ILIM70531 / ILIM70500 / ILIM70510 / ILIM70530
  • Yukon LED Courtesy Lights by Imtra Marine Lighting

    Click for larger image

    Imtra Marine Lighting

    Yukon LED Courtesy Light Diagram by Imtra Marine Lighting

    YUKON LED COURTESY LIGHTS BY IMTRA The new Yukon LED Courtesy Light with latest DC to DC constant current driver and Cree XRC LED PCB is designed for long term performance across a wide voltage range. Installation is made secure using two #6 stainless screws (not supplied). Low profile design with soft radius curves makes for an ideal step light. An effective heat sink design allows the LED to shine bright without risk of overheating. The static O-ring prevents water intrusion. Please read regarding Maryland, Massachusetts and Washington shipments sales tax.

      Features & Benefits:AISI 316 Stainless Steel Bezel · Low Power Consumption · Fully Waterproof · Vibration and Shock Proof · No maintenance: Up to 50,000 Hours Life · Installation Instructions
    US$49.95 / EACH
  • Trim Ring Finish: Polished Stainless Steel
  • Trim Ring Material: AISI 316 Stainless Steel
  • Lens Material: Frosted Glass
  • Trim Ring Diameter: 1.74" (44.2mm)
  • Cut-out Diameter: 1" (25.4mm)
  • Recessed depth: 0.76" (19.3mm)
  • Input Voltage: 10-30VDC
  • Input Power (Watts): 1.4W
  • LED: 1 x 1W Cree XRC LED, Cool White, Warm White, Blue or Red
  • Beam Angle (FWHM): 120°
  • Luminous Intensity: 45 Lumens Cool, 41 Lumens Warm
  • Correlated Color Temperature (CCT): 6,500K Cool, 2,850K Warm
  • Lifetime Hours (L70): 50,000 Hours (70% Output)
  • Wire Size: See Chart
  • Electrical Protections: Spikes (Up to 200V), Transient Protection
  • Mounting Method: Screw-Mount
  • Ingress Protection: IP65
  • Weight: 0.34 lbs.
  • Part Number: ILIM70611 / ILIM70601 / ILIM70621 / ILIM70631

  • TOP
    FREE SHIPPING OVER $100* We are having technical issues with our shopping cart 'Check Out'. To order, please call us at 1-818-989-2233 so we can take your order over the phone or email Questions? We accept Discover, Mastercard, Visa and American Express Shopping Cart Secured by Verisign