|
|
|
Hatches & Hatch Parts on this webpage (FREE
SHIPPING OVER $100*):
Ultra III Hatch
Ultra III Hatch Screens
Ultra III Hatch Handles and Arms
Hatch Replacement Parts Model Year 1990 to Present by Taylor Made Products
Adjustable Side Vent Handles
Door Pads
Stainless Steel Top-Lok
Hidden Hold-Down Fasteners
Window Savers
Foam Tape
White Twin-Flap Vinyl Deck Channel
Windshield Screw Saver Foam
Windshield Support Bar
|
|
ULTRA
III HATCH BY TAYLOR MADE PRODUCTS The Ultra III
Hatch by Taylor Made Products is a low profile access and ventilation
hatch that has a gray tempered safety glass for scratch resistance
and clarity. Features new security locking handles with lock-in
vent position and positive lock riser arms for easy open/easy close.
Pre-drilled mounting holes. Designed as a replacement for all Taylor
Made Products and similar style hatches. Trim Ring included.
Screens sold separately; see below. See below for Hatch
Screens and Parts. Made in USA.
|
|
ULTRA
III HATCH SCREENS BY TAYLOR MADE PRODUCTS Ultra
III Hatch Screens by Taylor Made Products for Ultra III Hatch shown
above. Made in USA.
|
|
ULTRA
III HATCH REPLACEMENT HANDLES AND ARMS BY TAYLOR MADE PRODUCTS
Ultra III Hatch Replacement Handles and Arms by Taylor Made Products
for Ultra III Hatch shown above. Made in USA.
|
|
HATCH
REPLACEMENT PARTS MODEL YEAR 1990 TO PRESENT BY TAYLOR MADE PRODUCTS
Hatch Replacement Parts Model Year 1990 to Present
by Taylor Made Products for Ultra III Hatch shown above. Please
see illustration on left side for part number with corresponding
image (NOTE: Part number 1728 is same as #1723 image; part number
1729 and 1730 are same as #1722 image). Made in USA.
|
|
ADJUSTABLE
SIDE VENT HANDLES BY TAYLOR MADE PRODUCTS
Replacement Side Vent Handles by Taylor Made Products are designed to replace
most original handles on side vent windows. Easy to install, these handles are
designed to fit side windows having exactly 1/4" mounting hole.
Sold by the PAIR - Left and Right handles.
|
|
DOOR PADS BY TAYLOR MADE PRODUCTS
The Door Pads are adhesive-backed rubber, measuring 3/4" x 3/4", which gives protection when on windshield doors.
|
|
STAINLESS STEEL TOP-LOK BY TAYLOR MADE PRODUCTS
The Stainless Steel Top-Lok are for 3/4" and 7/8" trim. Stud portion affixed.
|
|
HIDDEN HOLD-DOWN FASTENERS BY TAYLOR MADE PRODUCTS
The Hidden Hold-Down Fasteners is complete with nuts and rubber grommets.
|
|
WINDOW SAVERS BY TAYLOR MADE PRODUCTS
The Window Savers are designed to clip onto 7/8" or 1" tubing and hold your enclosures away. vent windows. Stops plastic windows from getting burned by hot tubing.
|
|
FOAM TAPE BY TAYLOR MADE PRODUCTS
The Foam Tape is an adhesive-backed vinyl, measuring 3/4" x 1/4" x 35', which provides a seal between the windshield bottom and boat deck or other boat sealing jobs.
|
|
WHITE TWIN-FLAP VINYL DECK CHANNEL BY TAYLOR MADE PRODUCTS
The White Twin-Flap Vinyl Deck Channel is punched to accomodate hidden fasteners or external angles.
|
|
WINDSHIELD SCREW COVER FOAM BY TAYLOR MADE PRODUCTS
The Windshield Screw Cover Foam is PVC based foam and is used with numerous original equipment windshields.
|
|
WINDSHIELD SUPPORT BAR BY TAYLOR MADE PRODUCTS
The Winshield Support Bars is used as original equipment on many fine walk thru windshields. Windshield support bars are made from either Anodized Aluminum Tubing with Nylon Fittings or Powder Coat Aluminum Tubing with Chrome Plated Zamak Feet. The fittings allow for pivot in almost every direction for easy installation. Sold in single units.
|
|
|