Plumbing Parts on this webpage:
Ball Valves - Full Port with Wire Fitting for Grounding
Pipe to Hose Connections - Curved 90 Degrees
Pipe to Hose Connections - Straight
T-Handle Drain Plugs
Transom Drain Tubes

BALL VALVES - FULL PORT WITH WIRE FITTING FOR GROUNDING Full flow Ball Valves has hard chrome plated ball seated in teflon seals. Double "O" ring stem seals. Ball Valves tested to 600 PSI for sea water, oil, or gas. Handle is #304 stainless steel and is vinyl covered. Pipe/Port sizes from 1/4" to 2". Finished in Pressure Cast Bronze.

PIPE TO HOSE CONNECTIONS - CURVED 90 DEGREES Standard tapered pipe threads to hose inside diameter. From 1/2" to 3/4" up to 1-1/2" to 1-1/2". Finished in Bronze.

PIPE TO HOSE CONNECTIONS - STRAIGHT Standard tapered pipe threads to hose inside diameter. From 1/2" to 1/2" up to 2" to 2". Finished in Bronze.

T-HANDLE DRAIN PLUGS Standard 1" brass and rubber plug designed to fit on the transom of most production boats.

TRANSOM DRAIN TUBES Designed to be installed down low in the transom. This item is the brass tube that either the standard T-Handle Drain Plug or the Flip-Lock Drain Plug slide into.