T-TOP HOTSHOT BOAT COVERS WITH BOW RAIL BY TAYLOR MADE PRODUCTS The 3 main features of these covers are:

The "console tube" or center portion of the cover fits over the console and under the T- top. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections. The draw ropes tighten the tube from side to side around the T-top verticals and also are used to secure the tube to the upper horizontal supports of the T-top. The "console tube" is not a perfect rectangle as it comes up off the cover halves. Rather it is more trapezoidal in shape and wider at the base than at the top. This feature allows these covers to fit and function properly even though there are variations in size and position of the T- tops within the confines of the hull and deck.

Tie down system in the hem or perimeter of the covers. To relieve stress on the zippered ends during over the road trailering we have added a webbing strap and quick release buckle to the cover at both sides just above the zipper to facilitate the installation of the cover by a single person. The rope that spans the perimeter of the cover is made into two sections; the first goes from one side at the zipper opening, around the bow to the same point on the opposite side. The second goes around the stern of the boat in a similar fashion. All T-Top Hot Shot Boat Covers with with Bow Rails are made of Hot Shot™ Acrylic Coated Polyester. Please click for Boat Cover Parts. Made in USA

Available in the above colors (in order): Pacific Blue, Hunter Green, Gray, Navy, Black, Cranberry and Teal