Bimini Tops by Taylor Made Products on this webpage (FREE SHIPPING OVER $100*):
Tower Bimini Top
Square Tube Bimini Tops
Full Frame Bimini BoaTops®
Custom Ski Boat Biminis
2-Bow Bimini BoaTops® Hot Shot™ for Small Fishing Boats and Inflatables

TOWER BIMINI TOP BY TAYLOR MADE PRODUCTS Tower Bimini Top by Taylor Made Products are designed to mount within the confines of most wake board towers to provide shade for the driver and spotter. All tops are 48" long and approximately 16" (from mounting point) and are available in three different widths to best fit most towers. Frame is constructed from bright dip anodized aluminum tubing and uses high quality marine grade hardware. Top features Ultima™ fabric for the best performance in strength, UV stability and longevity and is available in eight (8) popular colors. For more information please see Installation Instructions. Made in USA

Choosing the Correct Size Top: The tops will mount directly onto the tower frame at the center point, so pick the best position on the tower that will provide the best shade to the driver's seat. The tops are low profile at approximately 16" high at the maximum, so be sure that the position will keep the top high enough to clear the driver and spotter when seated. Measure across the tower at the mounting point that has been selected and choose the dimensions from the chart, noting the bimini width that matches your measured width on the tower. Check the width at the top and be sure that the angle of your tower will accommodate that dimension.

Available in the above colors (in order): Pacific Blue, Hunter Green, Gray, Navy, Black, Cranberry, Teal and White Vinyl

ATTENTION: In order to receive a complete Square-Tube Bimini Top 8' x 96" x 56" Set for Hot Shot™ and White Vinyl fabrics, you must order both the Bimini Top and Bimini Frame part numbers listed below.

ATTENTION: In order to receive a complete Square-Tube Bimini Top 8' x 102" x 56" Set for Hot Shot™ and White Vinyl fabrics, you must order both the Bimini Top and Bimini Frame part numbers listed below.

FULL FRAME BIMINI BOATOPS® BY TAYLOR MADE PRODUCTS Full Frame Bimini BoaTops® by Taylor Made Products are offered in a full frame construction as opposed to the three-piece knock down construction. The aluminum frames are available in all three (3) lengths (4', 6', 8'), three (3) heights (36", 42", 54") and widths ranging from 60" to 103". Frames are 7/8" bright dip anodized aluminum tubing with non-corrosive high-density black nylon fittings. Also available in stainless steel. Made in USA.

Available in the above colors (in order): Pacific Blue, Hunter Green, Gray, Navy, Black, Cranberry, Teal and White Vinyl
(Also available in Red, not shown)

CUSTOM SKI BOAT BIMINI BY TAYLOR MADE PRODUCTS Custom Ski Boat Biminis by Taylor Made Products are designed specifically for tournament/competitive style ski boats. These biminis cover the driver, observer and front of the engine box. Taylor Made Bimini BoaTops® create refreshing shade on your boat and let you enjoy the view over your windshield. Freestanding Bimini BoaTops® provide great air circulation and can mount in several locations on your boat. Includes all mounting hardware and fittings. Available in eight (8) great Hot Shot™ colors. For more information please see Installation Instructions and Additional Instructions. Made in USA.

Available in the above colors (in order): Pacific Blue, Hunter Green, Gray, Navy, Black, Cranberry, Teal and White Vinyl
(Also available in Red, not shown)

2-BOW BIMINI BOATOPS® HOT SHOT™ FOR SMALL FISHING BOATS AND INFLATABLES BY TAYLOR MADE PRODUCTS 2-Bow Bimini BoaTops® Hot Shot™ for Small Fishing Boats and Inflatables by Taylor Made Products. Get a more economical version of a Bimini BoaTop with the 2-Bow Bimini Top. All sizes are 42" high and 5' 6" long. Ideal for small fishing boats - offers boaters protection against sunburn.
These tops are to be used only when your boat is anchored or drifting, not while the boat is under power. Hot Shot™ Acrylic Coated Polyester Fabric has a Five (5) Year Limited Warranty and is breathable, lightweight, and water, mildew, and UV resistant.
For more information please see Assembly Instructions page 1 and page 2 including Warranty Information. Made in USA.

Available in the above colors (in order): Pacific Blue, Hunter Green, Gray, Navy, Black, Cranberry, Teal and White